Irrigation Engineering CE 2301, B.E Civil Engineering 05th Sem Anna University Chennai Question Paper November December 2012

Are you searching for old question papers of Anna University B.E Civil Engineering Question Papers? Look hereunder to get a question paper that was asked in Nov Dec 2012. Read more!

Anna University, Chennai

B.E/B.Tech Degree Examination, Nov/Dec 2012

Fifth Semester

Civil Engineering

CE 2301/10111 CE 501/CE 50 - IRRIGATION ENGINEERING

(Regulation 2008)

Semester : 05
Year : III
Branch : Civil Engineering
Subject Code : CE 2301
Subject Name : Irrigation Engineering
Type :  Image File

Anna University B.E./B.Tech May June 2014 HS1153 Engineering Chemistry II Question Paper

B.E/B.Tech. DEGREE EXAMINATION, MAY/JUNE 2012. 

Second Semester 

Civil Engineering 

HS 1153 - ENGINEERING CHEMISTRY II 

(Common to all Branches) 

(Regulation 2008) 

Time: Three hours Maximum: 100 marks 

Answer ALL questions. 

PART A - (10 x 2 = 20 marks) 

1. What is meant by refractoriness under load?
2. Define a lubricant.
3. What is meant by differential aeration corrosion?
4. What is Electroless plating?
5. Give any two differences between addition and condensation polymerisation.
6. What are polyurethane foams?
7. How is water gas superior to producer gas?
8. Define the terms Cracking and knocking.
9. Define bond length and bond angle.
10. What is SMILES notation?

PART B - (5x16=80 marks) 

11. (a) (i) Give an account of classification of refractories. (10)
(ii) Explain the following properties of lubricants such as Viscosity index, cloud and pour point, flash and fire point. (6)

Or 

(b) (j) Discuss briefly the preparation, properties and uses of Alumini bricks. (8)
(ii) Write a short account of Graphite and Molybdenum disulphide as Solid lubricant. (8)

12. (a) (i) What is cathodic protection? Explain sacrificial anode method of controlling corrosion (8)
(ii) Write short notes on electroplating. (8)

Or 

(b) (1) What is meant by electrochemical corrosion? Explain its mechanism. (10)
(ii) Discuss briefly on corrosion inhibitors. (06)

13. (a) (1) Discuss the preparation, properties and uses of Teflon and Nylon 6:6. (8)
(ii) Explain the process of vulcanization of rubber. What are its advantages? (8)

Or 

(b) (i) Discuss the preparation, properties and uses of Bakelite. (8)
(ii) Explain injection moulding with a neat diagram (8)

14. (a) (i) Describe the manufacture of metallurgical coke by Otto Hoffman's oven method. (8)
(ii) What are LPG and CNG? Discuss the advantage of LPG over gaseous fuel and CNG over LPG. (8)

Or 

(b) (i) With a neat diagram explain the analysis of flue gas by Orsat apparatus and mention its significance. (8)
(ii) Explain the manufacture of gasoline by Fischer - Tropsch method. (8)

15. (a) (1) Describe in detail MOL format and PDB format. (8)
(ii) Discuss the representation of structural information with an example. (8)

Or 

(b) (i) Write short notes on storage of structural data in a data base. (8)
(ii) Discuss the application of chem-informatics in drug designing. (8)

ME 2027 - Process Planning and Cost Estimation 2012 Anna University Mechanical Engineering Question Paper

Are you looking for old question papers of PPCE, Process Planning and Cost Estimation? The following contents represents a question paper that was asked in the year 2012 for Anna University Mechanical Engineering University Examinations. The subject was ME 1007 for regulation 2004. But in regulation 2008, the subject was changed as ME 2027. It is an elective paper for seventh semester. Read the full contents of PPCE question paper hereunder.

B.E/B.Tech DEGREE EXAMINATION, MAY/JUNE 2012. 

Seventh Semester 

Mechanical Engineering 

ME 1007 - PROCESS PLANNING AND COST ESTIMATION 

(Common to Production Engineering) 

(Regulation 2004) 

(Also common to B.E. (Part-Time) Sixth Semester Mechanical Engineering - Regulation 2005) 

Time : Three hours Maximum: 100 marks 

Answer ALL questions. 

PART A - (10 x 2 = 20 marks) 

1. Define SIMO chart.
2. What is the difference between method study and work measurement?
3. What are the types of process planning?
4. What are the activities associated with process planning?

5. State the objectives of cost estimating.
6. What do you mean by a realistic estimate?
7. State the functions of an estimator.
8. What is meant by Standard data?
9. Define the term 'Direct material cost'.
10. What do you mean by Overhead expenses?

PART B - (5 x 16 = 80 marks) 

11. (a) Enumerate the principles of motion economy pertaining to work place layout. (16)

Or 

(b) Discuss the objectives and various applications of ergonomics. (16)

12. (a) Describe the various types of charts, diagrams and other documents used in process planning. (16)

Or 

(b) (i) Explain the process planning procedure. (8)
(ii) What are the factors that influence process planning? (8)

13. (a) Explain the various methods of costing. (16)

Or 

(b) From the records of an oil mill, the following data are available.
(i) Raw materials
Opening stock = Rs. 1,40,000
Closing stock = Rs. 1,00,000
Total purchases
during the year = Rs. 2,00,000
(ii) Finished Goods
Opening stock = Rs. 20,000
Closing stock = Rs. 30,000
Sales = Rs. 6,00,000
(iii) Direct wages = Rs. 1,00,000
(iv) Factory expenses = Rs. 1,00,000
(y) Non-manufacturing expenses = Rs. 85,000
Find out what price should be quoted for a product involving an expenditure of Rs. 35,000 in material and Rs. 45,000 wages. Factory expenses to labour cost is 100/- (16)

14. (a) (i) Differentiate between cost estimating and cost accounting. (8)
(ii) Discuss the various allowances in estimation. (8)

Or 

(b) (i) What are the data requirements find sources available to develop an estimate? (8)
(ii) Briefly discuss the estimating procedure. (8)

15. (a) Briefly explain the estimation of machining time for various lathe operations with sketches. (16)

Or 

(b) Two 1 m long M.S plates of 10 mm thickness are to be welded by a lap joint with a 8 mm electrode. Calculate the cost of welding. (16)
Assume the following data.
(i) Current used = 30 amperes
(ii) Voltage = 300 V
(iii) Welding speed = 10 m/hr
(iv) Electrode used = 0.1 kg/m of welding
(y) Labour charges = Rs 4.00 / hr
(vi) Power charges = Rs 0.2/ kwh
(vil) Cost of electrode = Rs 40.00/ kg
(viii) Efficiency of machine = 70%

Download all previous years question papers for ME2017 PPCE here

Anna University EEE, ECE, CIVIL, MECH Question Papers

Are you searching for Anna University B.E/B.Tech question papers for EEE, ECE, CVIL, MECH, CSE, IT courses? Here is list of such question papers which are uploaded in the leading educational website Indiastudychannel.com.  The question papers are listed for all semesters (1st 2nd 3rd 4th 5th 6th 7th and 8th) of all courses mentioned above. Please have a look at the following links.




B.E Electrical and Electronics Engineering courses:

1. Electronic Devices: Third Semester May/June 2012
2. CS 1211, DATA STRUCTURES AND ALGORITHMS: Third Semester May/June 2012 (This is also common for B.E Instrumentation & Control Engineering and Electronics & Instrumentation Engineering courses)
3. CS1261, OBJECT ORIENTED PROGRAMMING: Fourth/Fifth Semester May/June 2012.
4. CS 2411/CS 609, OPERATING SYSTEMS: Seventh Semester May/June 2012
5. EC 1311, COMMUNICATION ENGINEERING: Fifth Semester May/June 2012
6. EE 2251, ELECTRICAL MACHINES I: Fourth Semester April/May 2011
7. EE2251, Electrical Machines - I: Fourth Semester Nov/Dec 2011
8. CS 2363, COMPUTER NETWORKS: Sixth Semester April/May 2011
9. 131301, MEASUREMENTS AND INSTRUMENTATION: Third Semester Nov/Dec 2011
10. 131303, ELECTRONIC DEVICES AND CIRCUITS: Third Semester Nov/Dec 2011
11. EE 2353, HIGH VOLTAGE ENGINEERING: Sixth Semester Nov/Dec 2011
12. CS 2411 OPERATING SYSTEMS, Seventh Semester Nov/Dec 2011
13. EE 2252, POWER PLANT ENGINEERING: Fourth Semester April/May 2011.

B.E Electronics & Communication Engineering course:

1. EC 1203/EC 1251 - ELECTRONICS CIRCUITS -I: Third Semester May/June 2012. It is also common for B.E. (Part-Time) Second Semester - Regulation 2005.
2. EC 1251/ EC 1304 - ELECTRONICS CIRCUITS - II: Fourth Semester May/June 2012
3. EC 1253/070280012 - ELECTROMAGNETIC FIELDS: Fourth Semester May/June 2012. It is also common to B.E. (Part-Time) Third Semester - Regulation 2005.
4. EC 1202 - ELECTRON DEVICES: Third Semester May/June 2012. It is also common to B.E. (Part-Time) Second Semester (Regulation 2005).
5. EC 1201/070290018 - DIGITAL ELECTRONICS: Third Semester May/June 2012. It is also common to B.E. (Part-Time) Second Semester - Regulation 2005.
6. EC 1015 - SATELLITE COMMUNICATION: Eighth Semester May.June 2012. It is also common to Seventh Semester - Information Technology for Regulation 2004 and to B.E. (Part-Time) Seventh Semester, Electronics and Communication Engineering, Regulation 2005.
7. EC 1013 - WIRELESS NETWORKS: Eighth Semester May/June 2012. It is also common to B.E. (Part-Time) Seventh Semester Regulation 2005.
8. EC 1003 - COMPUTER HARDWARE AND INTERFACING: Seventh Semester May/June 2012. It is also common to B.E. (Part-Time) Sixth Semester - Regulation 2005.
9. EC 1006 - MEDICAL ELECTRONICS: Sixth Semester May/June 2012.
10. 10. EC 2353 ANTENNA AND WAVE PROPAGATION: Sixth Semester Nov/Dec 2011. It is also common to PTEC 2353 - Antenna and wave Propagation for B.E.( Part- time)Fifth Semester Electronics and communication Engineering -Regulation 2009.
11. EC2204 SIGNALS AND SYSTEMS: Third Semester April/May 2010
12. EC2251 ELECTRONIC CIRCUITS – II: Fourth Semester April/May 2010
13. EC 2203, DIGITAL ELECTRONICS: Third Semester Nov/Dec 2009
14. Engineering Signals and Systems Important Questions.
15. CS 131, PROGRAMMING AND DATA STRUCTURES: Model Question Paper

B.E Civil Engineering Question Papers:

1. CE 2306/CE 55/CE 1302/10111 CE 506 DESIGN OF RC ELEMENTS: Fifth Semester May/June 2012
2. CE 1451/MG 1452/070100045 - ENGINEERING ECONOMICS AND COST ANALYSIS: Eighth Semester May/June 2012 and it is also common for B.E. (Part-Time) Seventh Semester - Regulation 2005.
3. AG 2211/180301/AG 33/CE 1201/10111 CE 303/080100009 - APPLIED GEOLOGY: Third Semester May/June 2012
4. CE 2021 HYDROLOGY: Sixth Semester April/May 2011

B.E Mechanical Engineering Question Papers:

1. ME 2041/ME 807 ADVANCED I.C. ENGINES: Eighth Semester May/June 2013
2. ME 1019/ME 1014/070120101 - MAINTENANCE ENGINEERING: Eighth Semester May/June 2012. It is also common for Production Engineering, Regulation 2004 and B.E. (Part-Time) Seventh Semester, Mechanical Engineering - Regulation 2005.
3. ME 1206-APPLIED ENGINEERING MECHANICS: Third Semester May/June 2012. It is also common to Aeronautical Engineering / Automobile Engineering / Mechatronics Engineering / Marine Engineering / Metallurgical Engineering and Production Engineering
4. ME 1302/070120059 - DESIGN OF MACHINE ELEMENTS: Fifth Semester May/June 2012. It is also common for B.E. (Part-Time) Fourth Semester - Regulation 2005.
5. MA 1253/MA 1259 - PROBABILITY AND STATISTICS: Fourth Semester May.June 2012. It is also common to Production Engineering, Automobile Engineering, Information Technology, Textile Technology, Textile Technology (Textile Chemistry), Textile Technology (Fashion Technology, common to Sixth Semester - Civil Engineering-Regulation 2004 & B.E. (Part-Time) Third Semester, Mechanical Engineering - Regulation 2005.
6. EC 1264/EC 1260 A - ELECTRONICS AND MICROPROCESSORS: Fourth Semester May/June 2012. It is common for B.E Automobile Engineering and Production Engineering.
7. CE 1262 - STRENGTH OF MATERIALS: Fourth Semester May/June 2012. It is also common to Automobile Engineering, Mechatronics Engineering, Metallurgical Engineering and Production Engineering, Regulation 2004.
8. ME 236 - DYNAMICS OF MACHINES: Fourth Semester May/June 2012. It is also common to Mechatronics Engineering-Regulation 2001.
9. ME 1015 - PRODUCTION PLANNING AND CONTROL: Eighth Semester May/June 2012. This paper is also common to B.E. (Part-Time) Seventh Semester Mechanical Engineering - Regulation 2005.
10. GE 2022/GE 607/GE 71 - TOTAL QUALITY MANAGEMENT: Seventh Semester May/June 2012
11. ME 1007 - PROCESS PLANNING AND COST ESTIMATION: Seventh Semester May/June 2012. This paper is also common for Production Engineering (Regulation 2004) and B.E. (Part-Time) Sixth Semester Mechanical Engineering - Regulation 2005.
12. ME 2305 - APPLIED HYDRAULICS ANS PNEUMATICS : Fifth Semester Nov/Dec 2011
13. ME 2204 FLUID MECHANICS AND MACHINERY: Third Semester Nov/Dec 2011
14. ME 2304 - ENGINEERING METROLOGY AND MEASUREMENTS: Fifth Semester Nov/Dec 2011. This paper is also common to Production Engineering (Regulation 2008) and common to PTME 2304 - Engineering Metrology and Measurements for B.E. (Part-Time) Fourth Semester - Mechanial Engineering - Regulation 2009.
15. ME 2266 - STATISTICS AND NUMERICAL METHODS: Fourth Semester April/May 2011. It is also to Automobile Engineering and Production Engineering.
16. ME 2252- MANUFACTURING TECHNOLOGY-II: Fourth Semester April/May 2011. It is also common for PTME 2252 Manufacturing Technology - II for B.E (part-time)Thrid semester Regulation 2009.
17. ME 2203 KINEMATICS OF MACHINERY: Third Semester April/May 2010.

B.E Computer Science and Engineering Question Papers:

1. CS 2354 - ADVANCED COMPUTER ARCHITECTURE: Sixth Semester April/May 2011.
2. 141303 OBJECT ORIENTED PROGRAMMING: Third Semester Nov/Dec 2011. This subject is also common for B.E. Computer Science and Engineering / B.Tech. – Information Technology.
3. 141304 ANALOG AND DIGITAL COMMUNICATION: Third Semester Nov/Dec 2011
4. CS 2354 ADVANCED COMPUTER ARCHITECTURE: Sixth Semester Nov/Dec 2011
5. CS 2401 COMPUTER GRAPHICS: Seventh Semester Nov/Dec 2011. This paper is also common to Information Technology, Regualation 2008.
6. MA 2265 - DISCRETE MATHEMATICS: Fifth Semester Nov/Dec 2011
7. CS 2301 - SOFTWARE ENGINEERING: Fifth Semester Nov/Dec 2011.

B.Tech Information Technology Question Papers:

1. IT 2354 EMBEDDED SYSTEMS: Sixth Semester Nov/Dec 2011. It is also common for common to Computer Science and Engineering (Regulation 2008).

More question papers will be updated later.


Want to know Plus Two HSC TN Result,  Click this link, http://indianuniversityquestionpapers.blogspot.in/2014/04/Plus-Two-Results-2014-May-9th-TN.html



You may also like, The VAO Model Questions and Answers. Available on YouTube!

MF7104 M.E Manufacturing Robot Design and Programming Anna University June/July 2012 Question Paper

This is the original question paper that refers to M.E Manufacturing Engineering  question paper from Anna University, Chennai (Regulation 2009). This paper titled, "Robot Design and Programming" is the second semester exam question paper, conducted for Manufacturing Engineering in the academic year 2012-13. The exam has been conducted in the month June 2012. The title is common for the subject codes: MF 9221/214204/MF 921. If you are M.E candidate, make use of this question paper then for your upcoming exams.

Note: This question paper is now applicable to MF7104 Robot Design and Programming [New Syllabus]

Update as on 22nd Jan 2016: Want April May 2015 Question Paper ? Download from, MF7104 Robot Design and Programming April May 2015 Question Paper

Fluid Power Automation second sem M.E Manufacturing Anna University Question Paper

The following question paper refers to M.E Manufacturing Engineering question paper from Anna University, Chennai (Regulation 2009). This paper entitled, "Fluid Power Automation" is the second semester question paper, conducted for Manufacturing Engineering in the academic year 2012-13. The exam was conducted in the month June/July 2012. The title is common for the subject codes: MF 9251/214072/MF 914. Make use of this question paper for your upcoming exams. All the best!

Anna University Manufacturing Metrology and Quality Control M.E first semester Manufacturing Question Paper

This is the question paper that refers to M.E Manufacturing Engineering  question paper from Anna University, Chennai (Regulation 2009). This paper titled, "Manufacturing Metrology and Quality Control" is first semester question paper, conducted for Manufacturing Engineering in the academic year 2012-13. The exam was conducted in the month June 2012. The title is common for the subject codes: MF 9222/214205/MF 922. Make use of this question paper for your upcoming exams.