Solapur University Question Paper
M.B.A. (Part – I) (Semester – II) Examination, 2014
MANUFACTURING AND OPERATIONS MANAGEMENT (Old) Paper – XII
Day and Date : Tuesday, 13-5-2014 Max. Marks : 70
Time : 3.00 p.m. to 6.00 p.m.
N.B. : 1) Q. 1 and Q. 7 are compulsory.
2) Attempt any two questions from Q. 2 to Q. 4.
3) Attempt any one question out of Q. 5 and Q. 6.
1. A) Select the correct alternative from the following : 7
1) Decisions on production, process design, facility location and layout are
part of _____________ decision category.
a) Tactical decisions
b) Operational decisions
c) Strategic decisions
2) Operations management deals with ____________ of the following.
a) Design of products b) Design of services
c) Acquisition of resources d) All of the above
3) Proximity to market is must for __________ industry.
a) Telecom industry b) Textile
c) Health care d) Call center
4) ________ is also called as cellular manufacturing layout.
a) Process layout b) Group layout
c) Fixed position layout d) Hybrid layout
5) ___________ is refer to the time lag between the point of order and receiving
the material.
a) Lead time b) Slack time
c) Reorder time d) Order time
P.T.O.
Seat
No.
SLR-XY – 13 -2-
6) What are the tasks of a purchase department in an organisation ?
a) Processing requisition for materials and supplies
b) Locating suppliers and vendors
c) Negotiating purchasing contracts
d) All of the above
7) Quality control is an important function that helps to increase consumer
satisfaction. At which of the following stages the quality control begins ?
a) Procurement of raw material
b) Start of production
c) Finished goods inventory
d) Dispatch of material to customers
B) Fill in the blanks : 7
1) In ______________ analysis, items are classified on the basis of their
annual consumption value.
2) A large quantity of single item production is called as __________
production.
3) _______________ determines starting time, finishing time and worker’s
assignments for all jobs at each work center.
4) The sum of waiting time and processing time of the job in the system is
known as ____________
5) All the factors that are included in producing a product are termed as
____________
6) Ship building is the good example of ____________ type of layout.
7) In _______ type of maintenance man uses his senses like hearing, touching
etc.
2. Write short notes on (any 3) : 14
a) Make or buy decision
b) Steps in industrial purchasing.
c) Primary and secondary objectives of materials management.
d) Types of manufacturing systems.
-3- SLR-XY – 13
3. Define maintenance, state importance of maintenance and give different types of
maintenance. 14
4. What is inventory management ? Explain different types of inventory
management. 14
5. Discuss main factors for designing plant layout and explain different types of
plant layout along with diagrams. 14
6. ‘Production planning and control is the key success of a business organisation’.
Discuss the statement listing various functions carried out under production planning
and control, their purpose in brief. 14
7. What is Production Management ? Explain the roles and responsibilities of
production manager in any manufacturing organisation. 14
_______________
M.B.A. (Part – I) (Semester – II) Examination, 2014
MANUFACTURING AND OPERATIONS MANAGEMENT (Old) Paper – XII
Day and Date : Tuesday, 13-5-2014 Max. Marks : 70
Time : 3.00 p.m. to 6.00 p.m.
N.B. : 1) Q. 1 and Q. 7 are compulsory.
2) Attempt any two questions from Q. 2 to Q. 4.
3) Attempt any one question out of Q. 5 and Q. 6.
1. A) Select the correct alternative from the following : 7
1) Decisions on production, process design, facility location and layout are
part of _____________ decision category.
a) Tactical decisions
b) Operational decisions
c) Strategic decisions
2) Operations management deals with ____________ of the following.
a) Design of products b) Design of services
c) Acquisition of resources d) All of the above
3) Proximity to market is must for __________ industry.
a) Telecom industry b) Textile
c) Health care d) Call center
4) ________ is also called as cellular manufacturing layout.
a) Process layout b) Group layout
c) Fixed position layout d) Hybrid layout
5) ___________ is refer to the time lag between the point of order and receiving
the material.
a) Lead time b) Slack time
c) Reorder time d) Order time
P.T.O.
Seat
No.
SLR-XY – 13 -2-
6) What are the tasks of a purchase department in an organisation ?
a) Processing requisition for materials and supplies
b) Locating suppliers and vendors
c) Negotiating purchasing contracts
d) All of the above
7) Quality control is an important function that helps to increase consumer
satisfaction. At which of the following stages the quality control begins ?
a) Procurement of raw material
b) Start of production
c) Finished goods inventory
d) Dispatch of material to customers
B) Fill in the blanks : 7
1) In ______________ analysis, items are classified on the basis of their
annual consumption value.
2) A large quantity of single item production is called as __________
production.
3) _______________ determines starting time, finishing time and worker’s
assignments for all jobs at each work center.
4) The sum of waiting time and processing time of the job in the system is
known as ____________
5) All the factors that are included in producing a product are termed as
____________
6) Ship building is the good example of ____________ type of layout.
7) In _______ type of maintenance man uses his senses like hearing, touching
etc.
2. Write short notes on (any 3) : 14
a) Make or buy decision
b) Steps in industrial purchasing.
c) Primary and secondary objectives of materials management.
d) Types of manufacturing systems.
-3- SLR-XY – 13
3. Define maintenance, state importance of maintenance and give different types of
maintenance. 14
4. What is inventory management ? Explain different types of inventory
management. 14
5. Discuss main factors for designing plant layout and explain different types of
plant layout along with diagrams. 14
6. ‘Production planning and control is the key success of a business organisation’.
Discuss the statement listing various functions carried out under production planning
and control, their purpose in brief. 14
7. What is Production Management ? Explain the roles and responsibilities of
production manager in any manufacturing organisation. 14
_______________
0 comments:
Pen down your valuable important comments below