Quantity Surveying and Costing Government Polytechnic DHM 2010 Exam Paper

Exam Board: Government Polytechnic
Question Paper Course: Diploma Hospital Management
Subject of Question Paper: Quantity Surveying and Costing
Time allotted: 3 Hours
Max. Marks: 70
Year of the exam paper: 2010
Question Paper Format: Text

Q.1 (a) Find out the quantities of following items from fig. no.1 Septic tank
i) Excavation for Soil strata or Rock [02 marks]
ii) Brick masonry in C.M. (1:6) [03 marks]
iii) R.C.C. Slab (1:2:4) [02 marks]
(b) Find out the quantities of following items from fig. no.2 Slab culvert
i) Excavation [02 marks]
ii) Brick masonry in C.M. (1:5) [02 marks]
iii) Cut cement pointing work in C.M.(1:1) [03 marks]

Q.2 (a) i) Find out weight of a P.R. angle 60x60x6mm having 5mt. length. [04 marks]
ii) Find out Painting area for a Purlin angle 125x75x8mm having 10mt. length [03 marks]
(b) i) Give the measurement unit for M.H. Cover, D.P.C., Air vent pipe, Iron steps [04 marks]
ii) Write deduction rules for Plastering [03 marks]
OR
(b) i) Give the measurement unit for Partition wall, Skirting, dedo, Pointing work [04 marks]
ii) Write the multiplying factor for Fully panelled door, Rolling Shutter , Partly paneled partly glazed door [03 marks]

Q.3 (a) i) Define Rate Analysis. List out the factors affecting R.A. 03
ii) Derive the R.A. for Ashlar masonry in C.M.(1:5) for S.S. 04
(b) i) Define Specification. What is the importance of Specification? 03
ii) Write detail Specification for Random Rubble masonry in C.M.(1:5) [04 marks]
OR
Q.3 (a) i) Listout the Principles of Specification Writing. 03
ii) Write detailed Specification for Ashlar masonry in c.m.(1:5) 04
(b) Derive Rate Analysis for First coat bituminous painting road 07

Q.4 (a) i) State the qualities of good estimator 03
ii) State the methods of approximate estimate, explain any one 04
(b) i) Give the service unit for dam, stable , water tank 03
ii) Give the requirements of materials for first and second coat bituminous painting road [04 marks]
OR
Q. 4 (a) Write Short note (any two)
i) Day work ii) Spot items iii) Prime Cost [07 marks]
b) In a Hume Pipe Culvert two aburtments having 6 mt. length, 0.9mt. width and 2.00mt height are constructed 5 mt. apart from each other. Three nos. of hume pipe having 1 mt. dia. are provided for culvert. Find out the quantities for following items. i) Brick masonry work in c.m.(1:5) for abutment 03 marks
II ) Nos of Hume pipe having length 2.25mt. and nos of Collar joint [04 marks]

Q.5 (a) Workout the quantity of earthwork for a portion of a road by Mid Sectional
Area Method from the following data.
Dist in mt. 0 100 200 300 400
Ground R.L.114.5 114.75 115.25 115.20 116.10
Dist in mt. 500 600 700 800 900
Ground R.L.116.85 118 118.25 118.10 117.80
R.L. of formation at 0 CH. 115. Upward gradient 1:200 up to 400mt. and downward gradient 1:400 from CH. 400 to 900. Formation width of road is 10 mt. and side slope for banking 2:1 and for cutting 1:1 [07 marks]
(b) A hill road is to be constructed in side-long ground in cutting. Calculate the quantity of earthwork for two chain length. The length of chain being 30mt.Side slope for cutting 1.5:1(H:V). The depth of cutting at the chainage 10 is 3.6 mt. at the centre and cross slope of ground is 8:1(H:V). The depth of cutting at the chainage 11 is 3.0 mt. at the centre and cross slope of ground is 12:1(H:V). The depth of cutting at the chainage 12 is 4.2 mt. at the centre and cross slope of ground is 10:1(H:V) [07 marks]
OR
Q.5 (a) Work out the quantity of earthwork for a portion of a road by Mean Sectional Area Method from the following data. Formation width of the road is 8 mt. side slope 2:1 in banking and 1.5:1 in cutting. The length of chain is 20 mt.
CH 20 21 22 23 24 25
G.L. 71.20 71.25 70.90 71.25 70.80 70.45
CH 26 27 28 29 30
G.L. 70.20 70.35 69.10 69.45 69.70
Formation level at chainage 20 is 70.00mt. Upward gradient 1:200 throughout [07 marks]
(b) A road is to be constructed in a side long ground partly in cutting and partly in banking. The formation width of road is 10mt. cross slope of ground is 6:1 side slopes in banking 2:1 and in cutting 1.5:1 Depth at the centre is 45cms although. Calculate the quantity of earthwork in banking and in cutting for a length of 200mt. [07 marks]

Refractory - II Government Polytechnic DHM 2010 Question Paper

Exam Board: Government Polytechnic
Question Paper Course: Diploma Hospital Management
Subject of Question Paper: Refractory - II
Time allotted: 3 Hours
Max. Marks: 70
Year of the exam paper: 2010
Question Paper Format: Text

Q.1 (a) Describe in detail about use of refractory in various industries. 07
(b) Describe about classification of Refractory. 07

Q.2 (a) Give detail various process of manufacturing of refractory products. 07
(b) Write manufacturing process of fire bricks. 07
OR
(b) Write manufacturing process of magnesite bricks. 07

Q.3 (a) Properties and use of mulite refractory. 07
(b) Describe effect of heat on Silica. 07
OR
Q.3 (a) Properties and use of zirconia refractory 07
(b) How to determine shrinkage of Refractory bricks. 07

Q.4 (a) Give reasons for failure of refractory products. 07
(b) Describe (a) Bulk density (b) Abrasion resistance 07
OR
Q. 4 (a) What is "PCE" ? Give in details. 07
(b) Describe (a) Thermal Conductivity (b) Spalling resistance 07

Q.5 (a) Describe about strength of refractory products. 07
(b) Scope of refractory industries in India. 07
OR
Q.5 (a) Give general properties and application of Fire Clay. 07
(b) Give general properties and application of Boxite. 07 

Reproduction Method Government Polytechnic DHM 2010 Question Paper

Exam Board: Government Polytechnic
Question Paper Course: Diploma Hospital Management
Subject of Question Paper: Reproduction Method
Time allotted: 3 Hours
Max. Marks: 70
Year of the exam paper: 2010
Question Paper Format: Text

Q.1 (a) Write about Letter Press Printing. 07
(b) Write about Flexography. 07

Q.2 (a) Write about Screen Printing. 07
(b) Write about Gravure Printing. 07
OR
(b) Write about Different Types of Papers. 07

Q.3 (a) Write about Offset Printing. 07
(b) Write about Full Tone and Half Tone Printing. 07
OR
Q.3 (a) Write about Multi Color Printing. 07
(b) Write about Flexography Printing Ink. 07

Q.4 (a) Explain the difference between Screen Printing and Flexography. 07
(b) Explain the difference between Offset Printing and Letter Press Printing. 07
OR
Q. 4 (a) (1) Why Flexography Printing is called Flexography? By which other name Flexography is known? From which material the Plate used for Printing in Flexography is made? 03
(2) Draw a Diagram of Type and write about the Components of it. 04
(b) Which Materials are suitable for Screen Printing? Why? On Which Materials Screen Printing is done? 07

Q.5 (a) How the Estimated cost of Printing is finalized? 07
(b) Write about the Equipments and Chemicals used for Screen Printing. 07
OR
Q.5 (a) Write about the Software used to prepare Design for Printing. 07
(b) (1) What do you mean by the Plate used for Offset Printing ?
Write about Different types Plates used for Offset Printing ? 02
(2) Which are the Ascender and Descended types? 02
(3) By which other name Rotary Offset Printing is known? By this Method where and on which Paper Printing is done? 03 

Business Communication Government Polytechnic 2010 Question Paper

Exam Board: Government Polytechnic
Question Paper Course: Diploma Hospital Management
Subject of Question Paper: Business Communication
Time allotted: 3 Hours
Max. Marks: 70
Year of the exam paper: 2010
Question Paper Format: Text

Q.1 (a) Write the meaning and occasions on which circular letter is written. 07
(b) State the advantages of sales letter. 07

Q.2 (a) Write a circular letter introducing a new product of electric scooter. 07
(b) Write a sales letter to promote LCD T.V. 07
OR
(b) Write a sales letter to promote the sale of Nokia 3 G mobile phone. 07

Q.3 (a) Draft a circular letter addressed your customers that you have been announcing the opening of a new branch of Samsung Cellular phone Co. 07
(b) What are the points to keep in mind while writing a collection letter? 07
OR
Q.3 (a) Write a circular letter to your customers on behalf of Bharat Enterprise, Ring road, Ahmedabad informing them that sole agency for Gujarat is given to Tata Distributors, River road, Ahmedabad. 07
(b) On behalf of customer write a letter asking for overdraft facility. 07

Q.4 (a) On behalf of bank write a reply letter to the who has been asking for overdraft facility. 07
(b) Write a reminder letter to your customer for collecting an amount (For bill payment). 07
OR
Q. 4 (a) Write a letter to customer informing the cheque drawn by him is dishonoured due to a difference between the amount in words and figures. 07
(b) Write a threatening letter to your customer for your payment which is overdue. 07

Q.5 (a) Write a favourable letter about financial standing of M/s Raj stores,Palace road, Surat who has given reference about Bank of India, Ring road, Surat to Bank of India, Gandhi Marg, Surat. 07
(b) What is business report? What are the characteristics of business report? 07
OR
Q.5 (a) Write an unfavourable reply to Bank of Gujarat, Relief road, Ahmedabad which has made inquiries regarding the financial status of M/s. Manoj & sons, Parle point, Ahmedabad from Bank of Gujarat, Satelite road, Ahmedabad. 07
(b) Draft a report on a suitable building for the new office for Walmart store. 07 

Mining - I Government Polytechnic 2010 DHM Question Paper

Exam Board: Government Polytechnic
Question Paper Course: Diploma Hospital Management
Subject of Question Paper: Mining - I
Time allotted: 3 Hours
Max. Marks: 70
Year of the exam paper: 2010
Question Paper Format: Text

Q.1 (a) Explain in brief problems associated with boring operation. 07
(b) Write various uses of bore holes 07

Q.2 (a) Differentiate between percussive and rotary drilling. 07
(b) Explain various ways of flushing the bore holes. 07
OR
(b) Explain surface arrangements for rotary drilling. 07

Q.3 (a) Write short note on Bore hole survey. 07
(b) Write the advantage of wire line drilling. 07
OR
Q.3 (a) Write short note on chilled shot drilling. 07
(b) Differentiate between plain and electric detonator. 07

Q.4 (a) Explain in brief coromant cut used for blasting. 07
(b) Explain various types of delay detonator. 07
OR
Q. 4 (a) Explain direct and indirect initiation with sketch. 07
(b) Explain with sketch various types of secondary blasting. 07

Q.5 (a) Write short note on Muffeled blasting. 07
(b) Enumerate accidents due to use of explosives. 07
OR
Q.5 (a) Explain in brief dealing a mishfire. 07
(b) Write short note on substitute of explosive. 07 

Electronics Network and Lines Government Polytechnic 2010 Question Paper

Exam Board: Government Polytechnic
Question Paper Course: Diploma Hospital Management
Subject of Question Paper: Electronics Network and Lines
Time allotted: 3 Hours
Max. Marks: 70
Year of the exam paper: 2010
Question Paper Format: Text

Q.1 Give statement of Thevenin's Theorem. Prove it with necessary equations. Calculate IL in the given circuit using this theorem. 14

Q.2 (a) What is resonance? Get the equations for current at resonance & the resonance frequency for a series resonance circuit. Define bandwidth & selectivity. Draw the frequency response curve for this circuit. 07
(b) Explain Low pass filter. Get the equation of 'Cutoff Frequency' for constant K type 'T' section. Draw & explain the frequency response curve for this circuit. 07
OR
(b) Mention the disadvantages of constant K type filters. In m derived filters what is 'm'? Explain composite filters. 07

Q.3 (a) Get the equations for transforming 'T' type network into 'p' type network. 07
(b) Explain the nodal analysis with an example. 07
OR
Q.3 (a) Design a symmatrical p network if R0 =600 ohms and D =40 dB. 07
(b) Get the equation for ZOT for a standard symmetrical T-network. 07

Q.4 (a) Get the general equation for voltage & current at any point on transmission line. 07
(b) Explain active High Pass Filter with required equations. 07
OR
Q. 4 (a) Explain waveform distortions. Get the equation for condition for distortion less line. 07
(b) Design a constant K High-pass Filter T & p Section if Cutoff Frequency = 6 Khz & R0= 600 Ohms. 07

Q.5 (a) What is duality? Explain using a series R-L-C circuit & required equations. 07
(b) Explain Kirchoff's current & voltage laws with examples. 07
OR
Q.5 (a) Explain mutual inductance & get the equation for coefficient of coupling. 07
(b) Give differences between active & passive filters. 07 

Design Fundamentals of Moulds Government Polytechnic 2010 Question Paper

Exam Board: Government Polytechnic
Question Paper Course: Diploma Hospital Management
Subject of Question Paper: Design Fundamentals of Moulds
Time allotted: 3 Hours
Max. Marks: 70
Year of the exam paper: 2010
Question Paper Format: Text

Q.1 (a) Design and draw sectional elevation and plan view of hand injection mold for a hollow cylinder type product. Assume suitable dimensions. 14

Q.2 (a) Define parting surface. Sketch any two types of parting surface. 07
(b) Draw socket headed screw of M-10 size with necessary dimensions. 07
OR
(b) Differentiate integer method and insert-bolster method. 07

Q.3 (a) Explain positioning of guide pin with neat sketch. 07
(b) Explain positioning of gate with neat sketches. 07
OR
Q.3 (a) Explain subsurface gate or sprue gate with neat sketch. 07
(b) Explain balancing of runner with neat sketch. 07

Q.4 (a) Draw a neat sketch of ejector plate assembly. 07
(b) Explain stripper plate ejection with neat sketch. 07
OR
Q. 4 (a) Draw a neat sketch of sleeve ejection technique. 07
(b) Sketch any four ejection elements. 07

Q.5 (a) Give function of any seven elements of two plate machine injection mold. 07
(b) Sketch any two designs for cooling core inserts. 07
OR
Q.5 (a) Give material of construction of any seven elements of two plate machine injection mold. 07
(b) Sketch any two design for cooling integer type core plate. 07 

Business Law Government Polytechnic 2010 Exam Paper

Exam Board: Government Polytechnic
Question Paper Course: Diploma Hospital Management
Subject of Question Paper: Business Law
Time allotted: 3 Hours
Max. Marks: 70
Year of the exam paper: 2010
Question Paper Format: Text

Q.1 (a) Define contract.Discuss essential elements of contract. 07
(b) Explain on consideration. 07

Q.2 (a) Explain :
1. Free Consent
2. Undue influence 07
(b) Write the modes of discharge of contract. 07
OR
(b) Explain on coercion. 07

Q.3 (a) Write the difference between:
1. Void and Voidable contract.
2. Bailment and Pledge 07
(b) Define the following terms under sale of goods Act. 1).goods 2).Document of title to goods 3). Price [07 marks]
OR
Q.3 (a) How the contract of agency can be created? 07
(b) Write a short note:.
1.Caveat Emptor
2. Rights of un-paid seller. 07

Q.4 (a) Explain on Right of storage in transit? 07
(b) Explain :
1.Documents of title of goods 2. Specific goods [07 marks]
OR
Q. 4 (a) Write difference between:
1). Sale & agreement to sell 2.) Conditions & Warranty [07 marks]
(b) What is Ratification? Write the essentials of a valid Ratification? 07

Q.5 (a) Define Negotiable instruments write the characteristics of it. 07
(b) Attempt following:
1. Noting and protest 2.Advantages of crossing the cheque. 07
OR
Q.5 (a) Write the Right available to the consumers by the consumers protection Act 1986. [07 marks]
(b) Write the following definitions under the consumers protection Act 1986.
1.Consumer dispute. 2.Consumer. [07 marks]

Pottery - II Government Polytechnic Diploma Hospital Management 2010 Question Paper

Exam Board: Government Polytechnic
Question Paper Course: Diploma Hospital Management
Subject of Question Paper: Pottery - II 
Time allotted: 3 Hours
Max. Marks: 70
Year of the exam paper: 2010
Question Paper Format: Text

Q.1 (a) Write short note on Plasticity and China clay 07
(b) Write molecular formula and chemical composition of a glaze. 07

Q.2 (a) Write the construction and function of spray dryer. 07
(b) Classification of white wares with their characteristics. 07
OR
(b) Write short not on water absorption and tensile strength. 07

Q.3 (a) Write the method of enamel decoration on crockery ware. 07
(b) Write the atomization process in modern method in ceramic industry. 07
OR
Q.3 (a) Write the mehtod of firing of wash bsin in a tunnel kiln. 07
(b) What are the various process of shaping pottery articles ? describe any one of them in brief. 07

Q.4 (a) Draw the flow chart for manufacturing process of stone ware pipes. 07
(b) Describe the process of manufacturing glaze frit. 07
OR
Q. 4 (a) Draw the flow chart for manufacturing process of ceramic floor tiles. 07
(b) Mention about the casting process. 07

Q.5 (a) What is pollution control and safety in ceramic industry. 07
(b) What is full form of MOR ? write on MOR and crazing test. 07
OR
Q.5 (a) Describe about the various process used for glaze application. 07
(b) Mention the important of controlling particle size of body mixture. 07