Saturday, November 14, 2015

CE6503 Environmental Engineering I Nov Dec 2015 Important Questions

CE6503 Environmental Engineering I Nov Dec 2015 Important Questions
Searching for important questions of CE6503 Environmental Engineering I for Nov Dec 2015 AU Chennai exams ? We are updating all previous years question papers, model question papers, lecture notes, 2 marks with answers, important 16 marks questions of CE6503 Environmental Engineering I here. You will here under find Nov Dec 2015 important questions of CE6503 Environmental Engineering I. The exam is to held on 17th November 2015. It is 5th Semester exam in BE Civil under AU Chennai R-2013.

Anna University Chennai
Department of B.E Civil Engineering
Fifth Semester
CE6503 Environmental Engineering I
November / December 2015 Exam Important Questions
(Regulation 2013)
Exam Date: 17th November 2015

1. Define the term per capita demand. Write the factors affecting per capita demand and state the
reasons for variations in demand.

2. What are the causes for pollution of surface and subsurface sources of water? State the measures to
be adopted to prevent pollution of water.

3. The census records of a city show population as follows: Present 50,000 Before one decade 47,100
Before two decades 43,500 Before three decades 41,000 Workout the probable population after one,
two and three decades by using Incremental increase method.

4. What is impounding reservoir ? What are various types of dams and explain the factors considered
for the selection of the dam? (16)

5. Draw a neat sketch of canal intake and explain the working principle. State its merit and demerits.

6. Write a brief note leak detection and state the various tests used to detect the leakage of water

7. What factors are required to be considered in the selection of the type of pump? Discuss the
situations under which the following types of may be used. a. Reciprocating pumps b. centrifugal
pumps c. Air lift pumps.

8. What are the different types of reservoirs used for storage purposes? Explain any one system in a
neat sketch.

9. Distinguish between the slow sand filter and rapid sand gravity sand filters in a tabular form

10. Draw a typical line sketch of water treatment plant and explain the various components in it

11. Design a sedimentation tank for water treatment plant to treat 8 MLD of water. Assume a surface
loading rate of 30 m3/m2/day. Check the adequacy of detention time. Draw the plan of the water
treatment plant.

12. With the help of the diagram, explain the process of Rapid sand filter

13. Explain the Nalgonda technique of deflouridation by exhibiting its use for an individual rural
household.

14. What is aerator? Explain different type of aerators with sketches.

15. Describe the procedure for removal of iron from raw supplies in rural areas.

16. Explain the ion exchange method of water softening with a sketch. (12)

17. Draw a neat sketch of a rain water harvesting structure and write the problems associated with
operation and maintenance of rain water harvesting structures.

18. Discuss with neat sketches the various types of layout of distribution system

19. What are the different method of analyzing a given distribution system? Explain Hardy Cross method of pipe network analysis

20. What are the points to be considered in the maintenance of distribution system of water supply?

Friday, October 30, 2015

CE6405 Soil Mechanics BE Civil Nov Dec 2014 Question Paper

Question Paper Download of Anna University Nov Dec 2014 for B.E Civil Engineering CE6405 Soil Mechanics / Important Questions of Soil Mechanics / Subject Notes of Soil Mechanics / Previous Years Question Papers of Soil Mechanics CE6405 / 2 marks and 16 marks questions of CE6405 Soil Mechanics B.E Civil Engineering

Anna University Chennai
Department of B.E Civil Engineering
B.E / B.Tech DEGREE EXAMINATION NOV DEC 2014
FOURTH SEMESTER
CE6405 Soil Mechanics
(REGULATION 2013)


University : Anna University Chennai
Question Paper Department : B.E Civil Engineering
Degree of Question Paper : B.E / B.Tech
Semester of Question Paper : IV / 04
Subject Code of Question Paper : CE6405
Subject of Question Paper : Soil Mechanics
Question Paper Content Details : Nov Dec 2014 Anna University Chennai B.E Civil Engineering 4th Semester Regulation 2013 B.E B.Tech Degree Examination CE6405 Soil Mechanics University Question Paper Scanned Copies




CE2032 Pavement Engineering BE Civil Nov Dec 2015 Important 2 Marks Questions

CE2032 Pavement Engineering BE Civil Nov Dec 2015 Important 2 Marks Questions
In search of important 2 marks questions for CE2032 Pavement Engineering ? This is an elective paper in Anna University Chennai R-2008 syllabus. You can here collect all important 2 marks questions unitwise. This subject is in the course of B.E Civil Engineering 7th Semester. Go ahead to collect the text version of 2 marks questions provided below.

Anna University Chennai
B.E B.Tech Degree Examinations Nov Dec 2015
Important Questions
CE2032 Pavement Engineering
B.E Civil Engineering
Seventh Semester
Elective Paper
2 marks questions

CE2032- PAVEMENT ENGINEERING :
UNIT-I TYPES OF PAVEMENT AND STRESS DISTRIBUTION ON LAYERED SYSTEM :
2 MARKS
1. Define Pavement?
2. What are the components of rigid pavement?
3. List some of the common strength tests for the soil sub grade?
4. State the assumption made in Boussinesq’s stress distribution theory?
5. What are the functions of surface in a flexible pavement?
6. State the difference between flexible and rigid pavements?
7. What are the different types of pavement?
8. What is meant by composite pavement?
9. Merits & Demerits of Rigid pavement?
10. Define ESWL?
11. Define rigidity factor?
12. What are the assumptions of ESWL?
13. What are the factors to be considered for the design of pavement?
14. State the basic requirements of pavement?
15. What is rigid factor in the design of highway pavement?
16. What is the function of soil sub grade?
17. What is the function of base coarse?
18. What is the function of wearing coarse?
19. How do you calculate the ESWL at a given depth below the pavement for a dual wheel assembly?
20. Classify the pavements based on the structural behavior?

UNIT-II DESIGN OF FLEXIBLE PAVEMENTS :
2 MARKS
1. What are the methods adopted for the design of flexible pavements?
2. State the limitations of CBR method of pavement design?
3. Define vehicle damage factor?
4. Define lane distribution factor?
5. Find the group index of a soil that has fraction passing 75 micron as 0%.
6. In-situ CBR tests are not recommended for design purposes. Why?
7. Mention the various approaches of flexible pavement design?
8. What is meant by VDF?

9. Mention the limitations of Group Index method of pavement design?
10. What are the components of flexible pavements?
11. Define CBR?
12. What is traffic index?
13. Define Group index method?
14. Define stabilometer method?
15. Define McLeod method?
16. Define Bur mister method?
17. What is the consideration for design of flexible pavements?
18. Write the formula for computation of design traffic?
19. How to find the deflection of sub grade pavement?
20. Define PSI?

Monday, October 12, 2015

CE2207 CE1206 CE6304 Surveying I Anna University Chennai Lab Manual

Looking for Surveying Practical - 1 practical lab Manual? Download Anna University Chennai B.E Civil Engineering 02nd year lab manual now. 

Anna University Chennai
Department  of  CIVIL Engineering
3rd Semester 
(Regulation 2008/2010)
Year of Course : 2
Syllabus : Anna university  regulation 2008/2010 
Subject Code : CE 2207 / CE 1206
Title of the Subject:  Surveying Practical - 1
Number of Pages in attachment (Images): 19
Lab Material Description : Anna University, CE 2207 / CE 1206 Surveying Practical -1 Manual for Regulation 2008 and 2010. It may be used for Regulation 2013 as well, Code in R-2013 is CE6304

SURVEYING
Definition
Surveying is defined as an art of determining the relative positions of points on,
above or beneath the surface of the earth by measurements of horizontal and vertical
distance, angles and directions.

Object
The primary object of a survey is the preparation of a plan (or) map.

Uses of Surveying
Surveying may be regarded as an art and science of map making. All engineering and construction projects extending over large areas, such as highways, railways, irrigation, water supply etc, are based upon elaborate and complete surveys. In all engineering projects the preparation of accurate plans and sections is the first necessity.

Primary divisions of surveying
Surveying may be divided into two classes
1) Plane surveying
2) Geodetic surveying

Plane surveying
In plane surveying the curvature of the earth is not taken into account, as the surveys extent over small areas. The degree of accuracy required in this type of surveying is comparatively low. If the area of survey is less than 150sq.km is considered as plane. Plane surveys are done for engineering projects on large scale such as factories, bridges, dams, highways,railways,etc., and also for establishing boundaries.

Geodetic Survey
In geodetic surveying, also called trigonometrical surveying, it is necessary to take into account the curvature of the earth, since large distances and areas are covered. The geodetic surveying deals in fixing widely spaced control points, it is carried out by great trignometrical survey dependent of India.

Download All Images now.





















Sunday, October 11, 2015

CE2405 - Computer Aided Design and Drafting Lab Anna Univ BE Civil Important Questions

CE2405 - Computer Aided Design and Drafting Lab Anna Univ BE Civil Important Questions
Want to know what to study for CE2405 - Computer Aided Design and Drafting Lab ? Head then to the list provided below, which are all most important lab questions being conducted by Anna University Chennai. This lab comes under the Civil Engineering UG department in Seventh Semester Syllabus. Get these questions provided below.

Anna University , Chennai
Government College of Engineering Tirunelveli
Department of B.E-Civil Engineering
07th Semester
CE2405 - Computer Aided Design and Drafting Lab
Nov / Dec 2015 Important Questions
(Regulation 2008)

1. Design of Cantilever Retaining Wall
2. Design of Counterfort Retaining Wall
3. Design of Flat Slab Interior Panel
4. Design of Flat Slab Exterior Panel
5. Design of Staircase
6. Design of Plate Girder
7. Design of Circular Water Tank
8. Design of Rectangular Water Tank-I
9. Design of Rectangular Water Tank-II
10. Design of Roof Truss
11. Design of RC Deck Slab Culvert
12. Analysis and Design of an Office Building

Sunday, June 14, 2015

AU BE Civil 3rd Sem all subjects R-2013 Syllabus Download

AU BE Civil 3rd Sem all subjects R-2013 Syllabus Download

Want AU BE Civil 3rd Sem all subjects R-2013 Syllabus Download? Get it from the following links.

University : Anna University Chennai
Content Type : Syllabus All subjects
Regulation : 2013
Department : BE Civil Engineering
Semester : III
ODD Semester
Total Subjects : 06 + 02

THEORY SUBJECTS: 06

MA6351 Transforms and Partial Differential Equations => Click on me to get download
GE6351 Environmental Science and Engineering  => Click on me to get download
CE6301 Engineering Geology  => Click on me to get download
CE6302 Mechanics of Solids  => Click on me to get download
CE6303 Mechanics of Fluids  => Click on me to get download
CE6304 Surveying I  => Click on me to get download

Practical Subjects : 02

CE6311 Survey Practical I  => Click on me to get download
CE6312 Computer Aided Building Drawing  => Click on me to get download







Search Everything Here