Annamalai University question paper december 2014
B.Sc. DEGREE EXAMINATION December 2014
(FASHION DESIGN)
(FIRST YEAR)
109: TEXTILE STUDY
(Old Regulations)
Time: Three hours Maximum: 60 marks
SECTION-A
Answer ALL questions
(15×1 = 15)
1. _________process in inserting filling yarns through the shed.
2. Spinning of yarn mean_______
3. The fabric produced directly from the fibre stage is called _______
4. If the two (or) more different kinds of fibres are combined that is the fibre _____
process.
5. When two (or) more yarns are twisted together, they are _______
6. Stretch yarns are type of ________yarns.
7. As the shuttle moves back and forth across the width of the shed, it weaves a selfedge
called the _______ of the fabric.
8. If each filling passes alternately over and under each warp in a square pattern, the
structure is _________weave.
9. ________ is the second most frequently used method of fabric construction.
10. Dobby is also called as _______
11. _______ is the method of fabric formation by plaited together by criss crossing.
12. _______ is the a derivative of netting.
13. The collections of more fabric cut piece with details of manufactures is called
__________.
14. __________, _________, ________ is the primary actions of weaving process.
15. The straight process puts the fibre into parallel lengthwise alignment is _________
process in spinning mills.
SECTION-B
Answer any FIVE questions
(5×3 = 15)
16. Yarn properties
17. Fibre blends
18. Leno weave
19. Satin weave
2
20. Coated fabric
21. Leather
22. Indentifying face and back of the fabric
23. Twisters spinning
SECTION-C
Answer any THREE questions
(3×10 = 30)
24. Explain in detail about cotton spinning system.
25. Explain the following weave structures. (a) Twill (b) Dobby (c) Pile (d) Huck-a-back
26. Explain the process involved in felt fabric
27. Explain about textured yarn.
28. Write about the warp knitting fabrics.
--------------------
5500
B.Sc. DEGREE EXAMINATION December 2014
(FASHION DESIGN)
(FIRST YEAR)
109: TEXTILE STUDY
(Old Regulations)
Time: Three hours Maximum: 60 marks
SECTION-A
Answer ALL questions
(15×1 = 15)
1. _________process in inserting filling yarns through the shed.
2. Spinning of yarn mean_______
3. The fabric produced directly from the fibre stage is called _______
4. If the two (or) more different kinds of fibres are combined that is the fibre _____
process.
5. When two (or) more yarns are twisted together, they are _______
6. Stretch yarns are type of ________yarns.
7. As the shuttle moves back and forth across the width of the shed, it weaves a selfedge
called the _______ of the fabric.
8. If each filling passes alternately over and under each warp in a square pattern, the
structure is _________weave.
9. ________ is the second most frequently used method of fabric construction.
10. Dobby is also called as _______
11. _______ is the method of fabric formation by plaited together by criss crossing.
12. _______ is the a derivative of netting.
13. The collections of more fabric cut piece with details of manufactures is called
__________.
14. __________, _________, ________ is the primary actions of weaving process.
15. The straight process puts the fibre into parallel lengthwise alignment is _________
process in spinning mills.
SECTION-B
Answer any FIVE questions
(5×3 = 15)
16. Yarn properties
17. Fibre blends
18. Leno weave
19. Satin weave
2
20. Coated fabric
21. Leather
22. Indentifying face and back of the fabric
23. Twisters spinning
SECTION-C
Answer any THREE questions
(3×10 = 30)
24. Explain in detail about cotton spinning system.
25. Explain the following weave structures. (a) Twill (b) Dobby (c) Pile (d) Huck-a-back
26. Explain the process involved in felt fabric
27. Explain about textured yarn.
28. Write about the warp knitting fabrics.
--------------------
5500
0 comments:
Pen down your valuable important comments below